Wednesday, October 16, 2019

Differences and Similitarities between Mozart and Beethovens early and Essay

Differences and Similitarities between Mozart and Beethovens early and late Symphonies - Essay Example Additionally, personal differences, in terms of lifestyles also contributed to the differences in their symphonies. Thus, the following are the differences and Similarities between Mozart and Beethovens early and late Symphonies: Similarities between Mozart and Beethovens early Symphonies Mozart and Beethovens early Symphonies were similar in various ways. First, their early symphonies are characterized by the application of Sonata form, which was the main musical structure that characterized the classical music era (Keefe, 66). The two composers applied Sonata form in almost every of their works, only that it could be combined with other forms of music structure such as the Rondo and the variation forms. The examples that can depict the use of the sonata form in their early works are the Mozart’s K 296 composition and Beethoven’s Piano quartets, also referred to as the WoO 36 (Will, 55). These are some of the earlier compositions by these two musical composers, which d epict the application of sonata form, almost in a very identical way. The application of sonata form as a musical structure by the two composers in these two earlier works is depicted by the division of the compositions into three sections. Both the K-296 symphony, which was composed in 1781 by Mozart and the WoO36 Piano quartet’s symphony, which was composed by Beethoven before 1792, displays the classification of the composition into the exposition, a development and a recapitulation sections (Will, 44). These symphonies entail the presentation of a transition, from how the tonal material of the compositions are organized in harmony at the exposition section, then developed into elaboration and contrast at the development section, and finally harmonized and resolved to create a harmoniously integrated rhythm at the recapitulation section (Keefe, 68). This musical structure starts with a harmonized and simplified tonal stability at the exposition section, then enters the dev elopment section where more tension is build, and complex tonal textures, far-ranging key changes and highly agitated rhythms are developed, to create the climax of the musical composition at the development section, and finally enters the recapitulation section, where the tension and tonal complexity is reduced, resulting to a cool harmonious finishing rhythm (Will, 41). These are the major characteristics of Mozart’s K 296 composition and Beethoven’s Piano quartets, which are some of their earlier works. Differences between Mozart and Beethovens early Symphonies There are notable differences between Mozart’s and Beethoven’s early symphonies. The difference emanates from the fact that while Mozart was a musical composer of his own making, Beethoven’s musical composition were a hybrid of Mozart’s and other artists’ style. In developing his symphonies, Beethoven was particularly influenced by Mozart on one hand and Joseph Haydn on the other (Keefe, 72). Therefore, he combined their musical composition styles to create a hybrid, which he then gave his own personality. This led to a development of a unique stylistic composition that was different from those of his influencers. Therefore, Mozart’s and Beethoven’s early symphonies were different in that, while Mozart observed musical rules and played within the confines of harmony and smooth transition of keys and rhythm, Beethoven adapted the style of

Innovating Essay Example | Topics and Well Written Essays - 1250 words - 1

Innovating - Essay Example However, social constructivism refutes the object obduracy and assumes that people are the only ones who can take the acting status. New technology may fail to lead to new arrangements of things and humans. They, in addition, may generate new forms and causality orders and, indeed, new forms concerned with the world. This means that technology can also generate both moral judgment and knowledge forms. A big portion of innovating part lies in inscribing the vision of the world in the content, which is technical, of the new object. The end of this work is a script or rather a scenario. This part of innovation is primarily concerned with inscription, followed by invention, the inventor, most significantly technology, scenario, script and vision. The author in page 208 till 209 argues that if one has interest in technical objects contrasted to chimera, it is difficult for them to get methodological satisfaction basing on the point of view of the user and the designer only. In conclusion, sociotechnical facts conversion into simple and pure facts depends on the technical object ability to turn into black boxes. This means that as objects become indispensable, they efface

Tuesday, October 15, 2019

Image of Filipino Women Essay Example for Free

Image of Filipino Women Essay Like in Estrella Alfon’s Magnificence; she illustrated that Filipino women are tough when it is for her children; while Lumnay was very weak and couldn’t accept her husband’s marriage to another woman. . Filipino women could stand and hold firm on her virtues and ideals. No matter what the consequences are, they stand for what is right. Sometimes they are mocked and insulted because of their ideals. But these women, like Miss Noel stood determined to continue what she has started and what she was fighting for. Esperanza is also a woman of virtue. She despises sleeping with a man to whom you’re not married. Some Filipino women are very innocent when it comes to hardships, emotions or other things surrounding them. Majority of these women were born or they belonged to middle class family. They haven’t experienced difficulties while growing up. While some women are oblivious to difficulties and hardships, some are introduced to it a very young age. They sacrificed their happiness for the sake of their family and loved ones. They think of everything as they’re responsibility and it affects their way of thinking, their social life and even their marital life. Filipino women are generous and very caring. They support their family through thick and thin. They will never let their family down especially when it comes to children. They are also very sweet and understanding, Filipinas are also very jealous, they are very possessive not only on the material things but also with their loved ones, especially the mothers. There are also this conservative God-fearing Filipinas. They have principles and won’t go against it. There are many more character traits a Filipina could have, but whatever the point is, Filipinas are raised differently and you could see it by the way they talk or move. Filipino women may look independent and wise but still, they need to feel deserve to be respected and cared for. They need to be loved and feel loved.

Monday, October 14, 2019

The Readymade Garments Industry Of Bangladesh

The Readymade Garments Industry Of Bangladesh The readymade garments industry of Bangladesh is the fastest growing export oriented industry of the country. Starting in late seventies, the ready made garment industry of Bangladesh now accounts for over 64% of the countrys total export earning. A close look at the composition of RMG export of Bangladesh over the last two decades reveals that the woven garments sub-sector constituted the lions share. In fact, the beginning of the development of RMG sector started with woven garments in 1985. In the first half the 90s, the share of woven garments was above 80%. However, the share gradually started to decline to about 70% in five years late and to 62% in 2004 and to 38.80% in 2005-2006 (Export Promotion Bureau Bangladesh, 2006). In addition, compared to its double-digit growth in the 90s, the woven garments export grew only about 8% in 2000. Such a declining growth rate and a steep decline of the share of woven garments export in the total RMG export makes it urgent to re-evaluate the status of the sector of Bangladesh vis-Ã  -vis with that of the competing countries. Moreover, with the dominance of the proponents of free market economy, some changes are taking place in the global trade regulations affecting the readymade gar ments sector of Bangladesh in general. One example of such change is the phasing out of the apparel quota on December 31, 2004. Under these circumstances, it is imperative to assess the competitiveness of the woven garments sector of Bangladesh in the global market place. Hence the researcher studied the overall woven garment industry in group and this study analyzes the woven garments industry competitiveness of a single organization from strategic management perspectives. 1.2 Rational of the Study The objectives of the enterprise analysis are the following. To identify the vision, mission, objectives, and values of the company. To identify the process of crafting and executive strategy. To analyze the companys resources and competitive position. To find out the application of the five generic competitive strategies. To find out the application of various complementary strategic options. To find out the fit of the strategies to the company and the industry situations. To identify various diversification strategies. To find out the application of ethics and corporate social responsibility. To identify the leadership styles and corporate culture. 1.3 Scope of the Study The study has some boundaries. The following points delineate those boundaries. Because of the highly fragmented nature of the industry even in the domestic market (with about 400 woven producers present in different parts of the woven garments value chain), aggregation of enterprises could not be provided. Rather, a whole view point of the enterprise has been taken. This limits the researchers of this study not to use financial aggregation as well since only a few woven garments industries (not more than 5) are enlisted with the stock exchange. The analysis has been confined to the key markets of the woven markets. The markets where Bangladesh occasionally exports or where the amount of export is very small, those markets are excluded from the scope of the study. 1.4 Methodology 1.4.1 Research design The study, given the nature of the objectives, has a descriptive research design. Since this study is going to be one of the earliest studies with similar objectives about the woven garments sector, the research would be of reporting kind. According to Cooper and Schindler (2003), at the very elementary level a reporting study is done to provide an account, or to make a summation of data, or to generate some statistics. They have also argued that a reporting study requires very little inference. However, the current study answers what and why of Macro environment, industry and competitive conditions, and thus, requires a great deal of inference. Hence, the current study would be more appropriately termed as a descriptive study. Therefore, the research design for the study is descriptive research design. 1.4.2 Data collection 1.4.2.1 Primary sources The researchers collected the enterprise data organizing and a number of key informant interviews (KII) with the key persons in Rahim Textile Mills Ltd. as I have selected this organization for the enterprise analysis. Due to time limitation, the participants were chosen through personal contacts and participants willingness to participate in the discussion. The key informants considered were senior managers of the selected organization and a few bankers related to the organization. 1.4.2.2 Key Informant Interview The researcher will select at least 7 owners or managers to interview as key informants. This interview will focus on the enterprise level information like the vision, mission, objective, current performance in both local and international markets, the competitors in both markets, products and so on. 1.4.2.3 Secondary sources The researchers have explored the following secondary sources to meet the objectives of the report. Data inventory of Bangladesh Export Promotion Bureau Bangladesh (EPB) relating to readymade garments export. Data inventory of Bangladesh Garments Manufactures and Exporters Association (BGMEA) On-line news archive of newspapers and news agencies home and abroad Annual report of the company Books and journals at the library of Institute of Business Administration and University Press Limited 1.5 Limitations of the Study The current study is limited by a number of factors. First, the participants for KII have been chosen conveniently. Second, the list of questions KII has been developed from the scratch by the researchers themselves. However, these limitations are not likely to invalidate the conclusions. The reasons are the following. First, the researchers will depend on both primary and secondary sources. Second, the primary sources have been bifurcated into managers of woven garments companies in Bangladesh. Third, the list of questions has been checked for recasting by the instructor of the course. The refinement of the list of questions following the suggestions of such an expert enhances the relevance and reliability of the questions asked. Hence, these two approaches ensure cross-validation of information needed to fulfill the objectives of the report. Strategic Planning process for Rahim Textiles Limited Mission and Goal SWOT External Analysis: Opportunities and Threats Internal Analysis: Strengths and Weakness Functional Level Strategy Business Level Strategy Global Strategy Corporate Level Strategy Corporate Performance, Governance and Ethics Implementing Strategy in a Single Industry Strategy Formulation Implementing Strategy across Industries and Countries 2.0 Company Profile 2.1 Vision The vision statement of Rahim Textile Mills Ltd is to create added value to the common wealth and to benefit the society. From the discussion with company managers, the researcher revealed that by the above stated vision statement they want to mean to improve the well being of valued equity holders, investors, employees and members of the society without interrupting or disordering the universal socio-ecological-economic position and the process of human civilization leading to peaceful co-existence of all the living beings. The vision statement of Rahim Textile Mills Ltd. lacks the important characteristics of a vision statement. First of all, from the vision the kind of company cannot be identified. It is too much generic and fails to identify the business or industry to which it is supposed to apply. This vision can be applied to companies of any kind of industry. Secondly, the vision statement is not focused to provide managers with guidance in making decisions and allocating resources. The vision is also bland and lacks motivational power. Finally, the vision statement of the company is vague in meaning; no concrete objective is mentioned in the vision. 2.2 Mission Realize the vision; the mission of the company is to play a leading roll in export oriented textile sector through reasonable application of Knowledge and Skills. This mission is also very weak in meaning. There is no description of the companys present business scope and purpose in the vision statement. 2.3 objectives The objective Rahim Textile Mills Ltd is to maximize our productivity on strict ethical standards at minimum cost to ensure optimum growth of wealth of the company. This is basically falls in the type of strategic objective. Since the company is making profit satisfactorily and the existing financial condition is healthy enough, they are concentrating on the strategic objective. 2.4 History Rahim Textile Mills Ltd started its journey in 31 December, 1981. The company commenced production in the year of 1987. Initially the company was producing only woven garments, afterwards with the expansion strategy the company built its capacity in both woven and knit sector as well as in dyeing. They already established huge factory at shafipur, Kaliakar and Gazipur, all outside but very much near to the capital city. The company has four sister concerns. They are as follows: Malek Spinning Mills Ltd. Knit Asia Ltd. New Asia Ltd. Salek Textile Ltd. Rahim Textile Mills Ltd. enlisted in Dhaka stock exchange on 29 March, 1988. 2.5 Products The main woven products of Rahim Textile Mills Ltd are shirts, trousers, hats and jackets, mostly made from cotton. Recently the company are enlarging its product width and producing inner wears for different worldwide famous brands. On the other hand, the company also produces knit garments products, e.g. sweaters and socks. Products Cotton products Shirts, trousers, hats and jackets Knit garments products Sweaters and socks 2.6 Export Volume and Destination As we discussed with the key persons of the company, the informants were declined to disclose the exact quantity of exports from their production, but they mentioned the proportion of export to total production. They mentioned that the company exports about 92% of its products. Most of the export is sent to USA as well as the other major portion in EU countries. From figure 2.3, it can be concluded that earning per share of the company is consistent and higher in the last year. In the last year Rahim Textile Mills Ltd. diversified its business in knitting sector and the result is increased earning per share in the last year. 3.0 Internal Analysis 3.1 Core competencies By the definition of core competence, it is a competitively important activity that a company performs better than other internal activities. In case of Rahim Textile Mills Ltd. its core competence is the quality of its products. In production the company has been using its highly experienced and skilled professional in its manufacturing process. Therefore it already gained loyalty from its buyers. The company not only concentrates in quality, but also maintains the cost of the product so that the cost becomes competitive among the rivalry in the industry. 3.2 Distinctive competencies From literature, distinctive competence is a competitively valuable activity that a company performs better than its rivals. The researchers tried to identify distinctive competence of Rahim Textile Mills Ltd. through key informant interview with the top level managers of the company. But from the response of the KII participants, it has been revealed that the company has no distinctive competence to attract the vigorous buyers in the market. 3.3 Key resources Key resource strengths of a company generally form the cornerstones of strategy and make the company competitive in the industry. From the KII with the top level managers of Rahim Textile Mills Ltd. the researcher identified that key resources of the company are: Highly experienced professional Better technology Better market access 3.4 SWOT Analysis In order to accomplish SWOT analysis the researcher followed the steps below. Figure 3.2: Steps of SWOT analysis. 3.4.1 Resource strength and competitive capabilities From primary data of KII and secondary data, the researchers identified the following resource strength and competitive capabilities. Highly experienced and skilled workforce as its intellectual capital relative to rivals which provides the company learning and experience curve advantages. Better product quality compared to the medium size competitive rivals Better customer base as compared to the small garments companies Technology is on average updated, but not like that of Square textile or Bex-tex Capacity is well-matched with its production volume. 3.4.2 Resource weaknesses and competitive deficiencies Potential resource weaknesses and competitive deficiencies of the company, as identified by the researcher, are mentioned below. The company has no clear strategic vision to direct the company towards specific targets Behind rivals is using e-commerce for their promotion purpose whereas the company even has no website for the convenience of information gathering by the foreign buyers. Its product line is narrow compared to the other rivals in the industry. It has no brand image in local market and very weak influence of brand in the global market, only with the selected suppliers. Long lead time is another crucial factor for which the foreign buyers are declined to buy its products. 3.4.3 Market opportunities Although Rahim Textile Mills Ltd. had been running their business in woven sector only, they are now expanding their business horizon in the knit sector also. The company realized that its skilled and experienced workforce can be utilized in the knit sector effectively and efficiently. We foresee a brighter future for us. Print and dyeing orders shall increase overall. We must continue to strive to achieve more orders which shall ensure greater progress and prosperity. It has become essential for us to embark upon capacity enhancement and balancing of our dyeing printing machineries urgently to meet the stringent quality assurances imposed by the buyers. We need to improve labor productivity and consistency in quality. We will face tougher competition both from within and outside. We need to resolve issues related to bond and customs to ensure faster disposal of imported raw materials. We need to work extensively and pursue the government to have provision of subsidy and other incen tives at different stages of production and process to remain competitive in the international market. The concerted and coordinated efforts will ensure higher production, better quality to make the production year 2007-2008 the year of greater progress and prosperity. 3.4.4 Threats to the future profitability Day by day the strong rivals are capturing the markets available to the industry in Bangladesh. Another threat is coming from technological change. Rahim Textile Mills Ltd. is not large enough to regularly update its technology to compete with other key rivals and so losing market share gradually. Besides, the company is facing cost cut competition from the rivals. 3.5 Prices and costs competitiveness The rise in the price of chemicals and dyes by over 30% also affected the order acceptance and overall production. Exporting countries of dyes, Chemicals and Colors especially China, India increased their prices making the market very competitive and difficult. Buyers took advantage of the competition amongst similar dyeing printing Factories and offered lower price. Despite such a situation we could improve both export and local market prices. Dearth of the trained manpower had led to poor labor productivity and inconsistency in the quality of textile products. 3.6 Business model A companys business model relates to whether the revenue-cost-profit economics of its strategy demonstrate the viability of the business enterprise as a whole. In case of Rahim Textile Mills Ltd. business model of the company is not only viable but also it shows its success in many consecutive year as the company is making huge amount of profit regularly. The business model of Rahim Textile Mills Ltd. is a proven model which ensures the companys viability in the market for a long period- from 1986. 3.7 Value chain of the company The value chain of Rahim Textile Mills Ltd. is similar to the following value chain model. Absent Figure 3.3: Value chain model for Rahim Textile Mills Ltd. On the value chain model, Rahim Textile Mills Ltd. lacks efficiency in sales and marketing. Therefore the company is loosing market share to the competitive rivals. Also there is no R D department in the company. This is why they are lacking in product innovation and product differentiation. 3.8 Dimensions of organizational culture Culture of an organization consists of the characteristics as described in the following figure. Figure 8.1: dimensions of organizational culture From the perspective of the woven garments industry in Bangladesh, most of the employees in the industry come from inferior background in terms of both academic and social status. Almost all the workers educational background is either SSC or below SSC. They are mostly unaware about the culture of the organization. Even the managers are very little concerned about the culture of their organization. From our focus group discussion, the discussants give importance on the following characteristics of organizational culture: Aggressiveness The managers are aggressive with their workers rather than easygoing. The managers always give pressure to the workers about their performance. Even a worker is performing satisfactorily; she or he is not given any kind of motivational incentive or compliments to continue his performance. Team orientation In this industry team orientation among the employees is nearly absent. The managers, in most of the cases being unaware about synergy, do not bother about the performance of team, rather always prefer individual performance. People orientation People orientation reflects the degree to which the management decisions take into consideration the effect of outcomes on people within the organization. By definition and comments of the discussants of FGD, this characteristic of organizational culture is rarely practiced by the managers in planning, design and implementation of production. Outcome orientation Outcome orientation measures the degree to which management focuses on results or outcomes rather than on the techniques and processes used to achieve those outcomes. In most of the woven garment industry the production managers are outcome oriented. They attach importance to the quality of the products rather than their production process and technology used in production. Attention to detail Attention to detail is the degree to which employees are expected to exhibit precision, analysis, and attention to detail. Since most of the workers in the garment industry are unskilled and even they are not provided any kind of training, they must follow the guidelines of their work literally as mentioned by the managers. 4. External Analysis 4.1 Competitor Analysis Major competitors of the Rahim Textile Limited is given below Monno fabric, Babylon Garments, Desh garments and Viella-tex Square Textile Mills Beximco Textiles The factors of similarity are mostly activism in marketing and selling, availability of local raw materials, delivery reliability, and level of backward linkage. 4.2 Competitive Positioning In order to identify the competitive position of the company, the researcher used strategic group mapping considering the selected 7 companies by the group. In strategic group mapping researchers has given importance to the cost of the products, product quality, active marketing, lead time, delivery time, and export quantity. The figure above shows that Monno fabric, Rahim textile, Babylon Garments, Desh garments and Viella-tex have similar ranking on the basis of the two attributes. All these five companies have higher quality while they are low in price. So, these five companies emerge as a strategic group. On the other hand, Square and Bex-tex have average performance on each of the considered factors of the mapping and hence, they can be said to fall in the same group. 4.3 Textile Industry: The textile industry in Bangladesh occupies a prominent position within the countrys industrial structure. It is the largest manufacturing sector, providing jobs for some 50% of the total industrial workforce and contributing 9.5% of the countrys GDP. Also, it accounts for almost 77% of total exports, making it Bangladeshs leading foreign exchange earner. In the early 1980s exports were dominated by jute while garment sales were insignificant. But today garment exports are by far the leading export category. In 2001/02 the clothing sector generated as much as US$4.58 bl in foreign exchange. The industry benefits from special access to markets in the EU, Canada, Norway and Japan. Because Bangladesh is a least developed country, its textile and clothing exports enter these countries quota-free and duty-free. This concession, together with low labour costs, provides the garment sector with a strong competitive advantage. But in order to produce garments for export, the sector has to purchase a large share of its yarn and fabric needs from abroad, especially woven fabrics. Few local textile firms are able to produce materials of the required quality or in adequate quantities. The Bangladeshi government is attempting to remedy this situation. To reduce the countrys import bill, it is offering tax concessions and incentives aimed at encouraging investors to develop the necessary backward linkages. Profitability of a market/industry depends on strength of five threats to profitability: 4.4 Porters Five Factor Analysis: 4.5 Industry life cycle Analysis: A useful tool for analyzing the effects of industry evolution on competitive forces is the industry life model, which identifies five sequential stages in the evolution of an industry that lead to five distinct kinds of industry environment: embryonic, growth, stakeout, mature and decline. Embryonic Shakeout Decline Maturity Growth Textiles industry is at maturity stage in the industrial product life cycle stage. 5.0. Strategy Analysis 5.1 Generic Competitive Strategy A competitive strategy concerns the specifics of managements game plan for competing successfully and achieving a competitive edge over rivals. A company achieves competitive advantages whenever it has some type of edge over rivals in attracting buyers and coping with competitive forces. There are countless variations in the competitive strategies that companies employ. Mainly because each companys strategic approach entails custom-designed actions to fit its own circumstances and industry environment. The mostly used five competitive strategies are shown in the following figure: Figure 4.1: Five generic competitive strategies 5.2 Low-cost provider strategy Among the five mentioned competitive strategies, Rahim Textile Mills Ltd. achieve overall low-cost provider strategy. The company is the lowest cost provider rather than just being one of perhaps several competitors with comparatively low costs. The companys strategic target is meaningfully lower costs than rivals but not necessarily the absolute lowest possible cost. 5.3 Fitness of the strategy Ready made garment industry is moving very fast, new competitors are emerging in the market frequently; growth rate is decreasing year after year. To cope with changes Rahim Textile Mills Ltd. must tailor its strategy so that the company can become profitable and competitive to surrounding rivalry establishing a distinctive competence. 5.4 Strategies for entering the market More and more companies are finding themselves in industry situations characterized by rapid technological change short product cycles because of entry of important and fast-evolving customer requirements and expectations -all occurring at once. Due to the entrance of new competitors the market for Rahim Textile Mills Ltd. is shrinking. To compete with these fast moving changes, this company has to be technologically sound, product innovative to attract the change-demanding customer and product diversification. 5.5 Strategies for coping with rapid changes It is very important to understand the key driving forces of an industry to decide upon the strategy of any company inside the industry. By searching the internet, reviewing related literatures, implementing key informant technique, and by organizing focused group discussion the following key forces have been identified. Growing use of internet technology and applications Increasing globalization Changes in the buyers requirements Changes in cost and efficiency Changes in global regulations in the textiles and apparels industry In Bangladesh internet technology and web applications play a vital role in establishing collaboration between importers and buyers abroad. Exporters communicate with Importers though internet where buyers put their proposal and ask for bidding. Prospective sellers bid through the internet and the lowest bidder is rewarded with sales contract This is how internet technology acts as a bridge in connecting business people across different parts of the world. In domestic market there is no such seller who uses websites as a part of their supply chain. Amazon uses website as a competitive tool in gaining customers. But such facilities havent yet gained prominence in a developing country like Bangladesh. So Rahim Textile Mills Ltd. can take an initiative eto develop website for buyers and suppliers. The overall global trade is increasing phenomenally every year and after. In business the process of going global is largely marked by increasing volume of export and import and greater number of licensing, franchising, strategic alliances, joint venture and setting up of foreign subsidiaries by business houses. Thomas Friedman while describing the trend of globalization summed it up in one sentence that globalization is farther, faster, cheaper, and deeper.(Hossain and Sandhir 2004) Key informant interviews reveal that trade liberalization has made it much easier for entering into new market and carry out manufacturing activities by out sourcing them. Brands like Reebok, Marks Spencer, Denim, Wall Mart, Levies, Nike etc. out source their manufacturing activities to countries like Bangladesh where they can get value chain activities done cheaper than any other part of the world. Although the ready made garment sector is not so much speedy changing, it has to be proactive about the market demand and thereby make itself prepared for the market demand. Other option is the company can react with the change. Rahim Textile Mills Ltd. is considering the latter approach. It is reacting with the changes. When the other companies are fighting to reduce lead time and improve delivery time, this company also trying to walk in the same way. The company is trying to incorporate new technology for its production process. 5.6 Strategies for sustaining rapid company growth As Rahim Textile Mills Ltd. is medium size company in the woven sector industry in Bangladesh, the company is following horizon 1: short-jump for sustaining rapid company growth. By this technique, the company is adding new items to the companys present product line, expanding into new geographic areas where the company does not yet have a market presence and launching offensives to take market share away from rivals. The objective of this short jump is to capitalize fully on whatever growth potential exists in the companys present business arenas. The sustainability of exports of woven garments in Bangladesh remains under question as the sector lacks backward linkages far from the requirements. At present, around 20 to 25 per cent of the raw materials required for the woven garments are supplied domestically whereas the same for the kit garment is 75 to 80 per cent. The manufacturers depend on the international market for the rest of the raw materials required for both the sectors. Given the pattern of growing demand for TC in the international market and the increasing competitiveness from the major exporting countries it would be difficult for Bangladesh to stand in the competition with her limited supply-side capacity. Bangladesh may supper a serious setback in outsourcing raw materials from the international market. 5.7 Diversification Strategy The big risk of a single-business company is having all of rhe firms eggs in one industry basket. If the market is eroded by the appearance of new technologies, new products, or fast-shifting buyer preference, then a companys prospects can quickly dim. For these reasons the company takes diversification strategy to broaden its business horizon. In the researchers case analysis, Rahim Textile Mills Ltd. has also realized the risk of single-business Company and also realized that the existing potential resources can be utilized efficiently if the business is broadened with the similar sectors. From this view point, Rahim Textile Mills Ltd. has extended its business in knitting sector as well as spinning. 5.8 Strategies for entering new businesses From the view point of input side, Rahim Textile Mills Ltd. considered the following factors in expanding its business horizon in new businesses. Existing technologies and expertise complement to the expanded business Existing competencies and capabilities are same valuable competitive assets for the expanded business New business in spinning and knitting is closely related to existing woven garments and so opens new avenues for reduction of cost The existing suppliers expanded their supply in spinning and knitting raw materials as well as buyers demanding products of knitting garments. Besides the management of Rahim Textile Mills Ltd. has thought about the outcome and the benefit of shareholders so that value is added to them.. There were three different choices for the company to diversify in the new business. The choices are as follows: Acquisition of an existing business

Sunday, October 13, 2019

Manufacturing :: essays research papers

Luke Lindsey   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Mana 156- behavior and Org. 02055325  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Case analysis 1 10-23-0  Ã‚  Ã‚  Ã‚  Ã‚  Mega Manufacturing   Ã‚  Ã‚  Ã‚  Ã‚  Mega Manufacturing is a manufacturer of sports shoes for men and women. They are investigating each department in order to cut back on spending in order to eliminate wastes of resources. One potential waste is coming from the cutting department. The waste of material is costing the company monitory resources that could further benefit the company if allocated elsewhere. Several solutions have been discovered with the cutting process but if the problem were to be solve d there is both a salary saving and the elimination of waste, in this particular department. However the solution lies with the employees of this department and the solution will cost some of them their jobs. The variables effecting the disclosure of this information vary from one's need for monitory income, to the esteem of the position. Management is facing several possible decisions that include employee employment assurance to cost savings and company bottom line figures. Their decisions are foun ded on management decisions, employee motivations and resistance to innovations and the notion of getting these resistant employees to adopt the innovations.   Ã‚  Ã‚  Ã‚  Ã‚  First, the management decisions regarding the cutting process and the problems that are associated with them. The notion that the skilled workers of the cutting department are aware of a solution to the problem with the breaking dies indicates that there is a solution to the problem. On the standpoint of the company, investigation into the proper use and successful completion of the cut using the die needs to be resolved. The die eliminates wastage and will speed up productivity of the cutting process. It will also make the individual machine operator more efficient which will conclude with the elimination of several positions may allocated more resources previously spent on employee salaries. This cost savings will free up allocations previously spent on overhead and allocated to other departments that may increase spending in order to increase sales, or add more to the stockholders bottom line. As a machine operator aware of this notion that relinquishing this i nformation could cost him/her their job, there needs to be some cause for hesitation. The workers are paid on an hourly base so the increase of efficiency will also allow management the ability to cut hours, which will also hurt the workers. If faced with this dilemma I would have to first find out if the solution the breaking dies were legit.

Saturday, October 12, 2019

Compressed Air and Water :: science

Compressed Air and Water The goal of the following research is to demonstrate that Carlton & United Breweries (CUB) reduced energy and water consumption will not only protect their environment, but also earn and save them extra income. Brewing used to require about 25 litres of water per litre of beer, nowadays it requires only 4 to 5 litres*, on the other hand, compressed air accounts about 10% of electricity consumption in the industry*. CUB needs to use cutting edge technologies, more preventive maintenance programs and â€Å"very simple ways in which the procedure can become cleaner†* in order to reach and overcome these requirements. And let’s not forget that every litre of water and watt of energy saved will be reflected as a profit. Water Issue CUB has taken the water issue in consideration, reducing its consumption by 7-9%, only by installing a recycling system which is capable of distributing re-used water for the cooling towers of the engine room, boiler house, floor wash-down and pasteurisation*. However, there is a lot that can be done in order to reduce even more this percentage; cisterns on the roof collect rainwater that can be used for the toilets and landscape irrigation, saving 3.9 million litres of potable water a year*, and also, can be purified and used as the re-used water if necessary*. Cascade Brewery, also from Australia, is saving an average of 5,812 KL per month*, some of their main water reduction actions are: replacement of heat exchange equipment with more efficient units, steam condensate return to the boilers, The installation of a 32 KL tank at to collect water from the carbon dioxide and air compressors for use as boiler feedwater, among others*. Compressed Air Issue Not much has been done in order to make a significative reduction in the compressed air issue. Actually, it has reduced 1%, only by applying air knives instead of compressed air in order to dry the bottles before labelling and a leak identification program. There is wide range of possibilities CUB could work on in order to reduce its compressed air consumption, which it’s translated into less energy consumption from the air compressors and blowers. Switch to state of the art air compressors, these can really mean a huge difference regarding energy consumption*. Variable Speed compressors (VS), can match the air demand by adjusting the motors RPMs and energy consumption, however, VS are most efficient at low to mid capacity ranges (20-60% full load), and are designed only to intermittent operation at 100% capacity*.

Friday, October 11, 2019

Teen-pregnancy and sexually-transmitted diseases

The world we are living in right now is full of uncertainties. The population is increasing rapidly, as the number of hungry mouths also increases. Diseases are spreading around the world, some of which we know none about any cure. Adding up the ignorance building up inside the minds of the youth, we are creating a bomb projected to explode in the near future. Misconceptions about certain facts in life must be taken care of, since ignorance would only lead to further disaster.Considering the current situation of today’s young minds, their curiosity could lead them to their own destruction. There are certain delicate topics belonging to this context. This includes the ongoing debate about teenage pregnancy and the increasing number of sexually-transmitted disease. Raising the awareness of these young minds would only raise their curiosity, thus endangering their own lives and future. That is why when it comes to this issue, the best way to deal with it is not to engage it.Preve ntion is better than cure. Thus, this leads us to a firm stand; therefore I will have to argue in favor of the proposition that â€Å"Abstinence-only programs are the most effective approach in order to prevent teen-age pregnancy and some sexually transmitted disease. † Teenage Pregnancy. Teenage pregnancy nowadays is already at its worst. The world is being populated at an alarming rate, and we can’t do anything about it.The young generations have been contributing a lot to this problem, engaging in an early sexual life, thus, leading to certain unwanted events like early parenthood; unwanted pregnancies leading to the decision of rearing the child, thus adding another mouth to feed in this increasingly over-populated world we live in. These teenagers could have made a difference by not venturing into the aspects of life where curiosity could actually spell disaster if certain situations arise.According to Starkman, it is approximated that by the end of high school, a lmost 70% of young Americans are considered sexually active, wherein about 20% of these have had four or more sexual partners. Despite these alarming numbers, less than 50% of all public schools of America present sufficient information and overview about contraceptives and the risks of pregnancy, thus contributing a lot to what could be a great build up in people unaware of the realities of having early sexual life.It is clear that there are millions of American youth all over the United States that involves in various sexual behaviors that puts them in great risk of early pregnancy. Despite the numbers, there is no federal directive as to how these problems would be dealt with. Less than half of all the public schools in the United States offer sufficient information about acquiring birth control, thus leaving a lot of questions unanswered (Starkman & Rajani, 2002).According to Fields, â€Å"abstinence-only† sexuality educations in schools have advocated that it could prote ct their children from the damaging influence of other people. It provided guidance which teenagers could follow in order to avoid unwanted pregnancies, wherein you take the roots of the problem in order to solve it (Fields, 2005). According to Meier, pregnancy could be a sex determinant, since the fear of teen pregnancy could lead to a mentality wherein the person would be hesitant in indulging in such sexual activities.Abstinence is the only way, the safest to be exact, to avoid unwanted pregnancy. Resorting to the use of contraceptives doesn’t assure of a 100% safety from pregnancy. It could fail, thus doesn’t assure of the â€Å"safe† sex contraceptives usually offer. Abstinence should be promoted, and should be recognized as the only means to promote a pregnancy outside a married life, or a life wherein you could provide for the offspring. Pregnancy at an early age doesn’t assure a better life for both the parents and the offspring (Meier, 2004). Sex ually-transmitted diseases.According to Starkman, about 50% of the newly discovered human immunodeficiency virus (HIV) cases in America and about 70% of all the sexually transmitted diseases surface on young Americans, those of which are usually under 25 years old. The old statement about prevention is better than cure applies for this, and since there are incurable cases of the HIV and STD’s, it is better to avoid and prevent rather than resorting to the curing part. Because of that, it is better to reserve the sexual activities of the person at the mature age, wherein you are responsible enough for you actions thus, being able to know what to do.Young teenagers who suffer from STD’s don’t know what to do, how they will deal with their situation (Starkman & Rajani, 2002). Abstinence-only education encourages teens not to engage in early sexual activities in order for them to avoid having sexually transmitted infections and diseases. It is clear that prevention is really better than cure, and that encouraging the youth in practicing safe sex and introducing contraception only worsens the case because it deviates from the real goal, to prevent STD’s. No sex for the youth is better than â€Å"safe† sex, because it is not purely 100% safe.It only lessens the chance of getting infected, yet you cannot deny the fact that lessening is not getting any better than preventing. Analysis and Conclusion With all the facts presented, it is evident that â€Å"keeping it safe† and protecting yourself is not enough when it comes to matters like teenage pregnancy and Sexually Transmitted Diseases. Even though some people see safe sex as a â€Å"big chance† to avoid pregnancy and certain diseases, you are still risking that â€Å"small chance† of those things happening. It is not enough to take precautionary measures and still do the deed.The most important thing to do and to consider is how people, especially the youth ca n avoid the problem completely, and this is through abstinence, purely abstinence only. Reference: Fields, J. (2005). ‘Children Having Children': Race, Innocence, and Sexuality Education. Social Problems, 52(4), 549-571. Meier, A. M. (2004). The morning after (and beyond): Adolescent well-being after first sex. ProQuest Information & Learning. Starkman, N. , & Rajani, N. (2002). The case for comprehensive sex education. AIDS Patient Care and STDs, 16(7), 313-318.